No clean, alcohol-based flux, synthetic resin,di-carboxylic
acids, halogen-free (WEEE/RoHS conformant)
Type 184.108.40.206 // REL0 acc. ISO 9454 // DIN EN 61 190-1-1
Standard packaging units 20 L
|Appearance:||colorless to light yellow, clear|
|Solids content:||2.5 wt%|
|Density 20 °C:||0.794 (+/- 0.003) g/cm³|
|Acid number:||21 - 25 mg KOH/g|
|Activators/resin:||synthetic resin contentn with di-carboxylic acids|
|Flash point:||12 °C|
S-250/FRO is universally suitable for wave soldering. It is used successfully for a wide range of systems and wave types in both leaded and lead-free processes. Its high temperature stability and very good activity over a wide temperature range ensures a wide process window with best soldering results. The surfaces are very clean after soldering, the SIR is above the standards.
S-250/FRO is unsuitable for foam and spray fluxing and not recommended for selective and manual soldering (see also product matrix).
Practice has shown, that no washing is needed for PCBs properly soldered with S-250/FRO. The IC test with needle adapters is generally not affected.
Customer added value:
- Very good soldering properties (capillarity, wetting)
- Broad process window (very high thermal stability, good activity over a large interval)
- Very good residue behaviour (very clean, high SIR)
Questions about our products?
We will advise you by phone 06123 / 7046-0.